Three-channel Amplifier Modules
For use in stereo sets, composed of subwoofer and full-range speaker pair. Three-channel amplifier is installed in the subwoofer
Park Audio™
Versions
With analog input section: – input section with stereo line inputs, stereo line outputs, mode switch, separate subwoofer and saltellites level controls.
With DSP input sections: – input section with line stereo inputs, switched line stereo outputs, input level control, subwoofer level control, preset switches.
INPUT SECTION:
- D class power amplifier
- Switching power supply
- Power factor corrector (optional)
- Forced cooling
- Detachable power cord
- MONO-STEREO mode
- MONITOR mode. One of the satellite channels is used as a monitor amplifier.
- STEREO-MONO-MONITOR mode switch
- Line inputs – 2 х XLR
- Line output (parallel to line inputs) – 2 x XLR
- Satellite outputs – SPEAKON
- Satellite level controls
- Subwoofer level control
- Level controls and LEDs are located on the top panel, connectors are located on the rear panel
- Analog input section, acting as crossover, EQ, limiting and speaker overload protection
- Overload and short-circuit protection
- DC output protection
- High frequency protection
- Thermal protection
| MODEL | DX1000T | DX1400T | DX2100T-4 | DX2100T-8 |
|---|---|---|---|---|
| Channel A,B Power Rating*, 4Ω | – | – | 350 W | – |
| Channel A,B Power Rating*, 8Ω | 350 W | 350 W | 200 W | 350 W |
| Subwoofer Channel Power Rating*, 4Ω | – | 700 W | 1400 W | – |
| Subwoofer Channel Power Rating*, 8Ω | 350 W | 380 W | 800 W | 1400 W |
| Channel A,B Frequency Range**(0, - 0.5 dB) | 130 Hz - 20 kHz | 130 Hz - 20 kHz | 130Hz - 20 kHz | 130 Hz - 20 kHz |
| Channel B Frequency Range**(0, - 0.5 dB, MONITOR mode ) | 45 Hz - 20 kHz | 45 Hz - 20 kHz | 45 Hz - 20 kHz | 45 Hz - 20 kHz |
| Subwoofer Channel Frequency Range**(0, - 0.5 dB) | 45 Hz - 130 Hz | 45 Hz - 130 Hz | 45 Hz - 130 Hz | 45 Hz - 130 Hz |
| Total Harmonic Distortion *** | 0.05 % | 0.05 % | 0.05 % | 0.05 % |
| Damping Factor ( 8Ω, 200Hz ) | > 200 | > 200 | > 200 | > 200 |
| Slew Rate | 20 V/uS | 20 V/uS | 20 V/uS | 20 V/uS |
| Signal-to-Noise Ratio | 98 dB | 98 dB | 98 dB | 98 dB |
| Sensitivity** | 0.775 V | 0.775 V | 0.775 V | 0.775 V |
| Power Requirements | ~230 V, 50/60 Hz | ~230 V, 50/60 Hz | ~230 V, 50/60 Hz | ~230 V, 50/60 Hz |
| Weight (without PFC / with PFC) | 4.5 / 4.8 kg | 4.5 / 4.8 kg | 5 / 5.3 kg | 5 / 5.3 kg |
| Dimensions (W х H х D) | 198 х 409 х 128 mm | 198 х 409 х 128 mm | 198 х 451 х 128 mm | 198 х 451 х 128 mm |
* At mains voltage:
– ~230 V for amplifier without Power Factor Correction (PFC);
– ~160-280 V for amplifier with Power Factor Correction (PFC).
** Basic model.
*** In the operating frequency range of the corresponding channel.
