Park Audio™
D422e
Active loudspeaker
Application: PA system for indoor and outdoor use: clubs, bars, restaurants, music bands.
Versions:
active with built-in DSP engine.
Other line arrays:
- Optimal curvature of the line array, consisting of ywo elements(LF 8”+ HF 2 х 1”) to provide advanced vertical coverage
- Maximum Output SPL 127 dB SPL
- Frequency Range 70 Hz – 18 kHz
- Coverage 100°H x 22°V
- Flange for mounting to the speaker stand
- Adjustable vertical til ±13.5° (step 4.5°)
- 16 suspension points M10 for mounting to the loudspeaker
- Cabinet material – 15 mm birch plywood
- Cabinet coating – black water-polymer paint
- Protective grid – perforated steel with powder coating
- Additional moisture protection – acoustically transparent foam (glued to the inner surface of the grid)
- Built-in amplifier 2 х 700 W RMS with DSP engine for FIR settings
- Amplifier cooling system – forsed with smoothly veriable intensity
- Switching power supply with PFC
- Power requirements – ~160 – 280 V
- Input level control
- Line input/output – XLR / XLR
- Line input switch: THRU, OUT to subwoofer
- THROW switch(HF signal level):SHORT, MIDDLE, LONG
- LF level switch: NORM, LF BOOST
- Detachable power cord
MODEL | D422e |
---|---|
Acoustic System | |
Configuration | Active two-way line array |
LF driver | 2 x 8"dia B&C SPEAKERS, voice coil 2" |
HF driver | 4 x 1"dia B&C SPEAKERS, voice coil 1.4" |
Acoustic Design | Trapezoidal cabinet. Bass Reflex |
Power Handling (nom./continuous): | |
– HF | 100 / 200 W |
– LF | 400 / 800 W |
Frequency Range: | |
– NORMAL Mode | 110 Hz - 18 kHz |
– LF BOOST Mode | 70 Hz - 18 kHz |
Coverage | 100°H x 22°V (-6 dB) |
Maximum Output SPL* | 127 dB/ 1 m |
Weight | 21 kg |
Dimensions: | |
– width | 398 mm |
– height(front/rear) | 452 / 364 mm |
– depth | 364 mm |
Built-in 2-channel power amplifier with DSP engine | |
Power Rating (RMS) | 2 х 700 W, class D |
Sensitivity | 775 mV |
Impedance | 10 kOhms |
Signal-to-Noise Ratio | 98 dB (unweighted) |
Input/ Line output | XLR/XLR |
Cooling | forced** |
Power Requirements | ~160 - 280 V, 50 / 60 Hz |
DSP engine | |
Sampling Rate | 48 kHz |
DAC/ADC | 24-bit |
Internal Processing | 56-bit |
* For comparison purposes and in accordance with common industry practice, maximum SPL specifications are calculations based upon transducer sensitivity, amplifier output voltage and speaker impedance.
** With smoothly variable intensity. At a normal temperature and low output level the fan is OFF.
Empty tab. Edit page to add content here.