Active PA System L-Set 101 BT

Park Audio™

L-Set 101 BT

Application: PA system for use in schools, houses of worship, small clubs, bards and presentations.

Set Contents:

  • Loudspeaker L101BT – 1 pc.
  • Loudspeaker L101 – 1 pc.
  • Cable SpeakON-SpeakON (8 m) – 1 pc.
  • L-Set 101
  • L-Set 101
  • L-Set 101

Active PA system L-Set 101 BT

  • Total power handling – 350 W
  • Total maximum output 120.5 dB SPL
  • Set frequency range 58 Hz – 19 kHz
  • Quick single cable set mounting
  • Flange (35 mm) for the speaker stand
  • 6 Mounting holes M10 on each loudspeaker

Loudspeakers L101, L101BT

  • Configuration – two-way loudspeaker
  • Coverage 100°H x 50°V
  • Acoustic design – trapezoidal cabinet, bass reflex
  • LF speaker (LAVOCE Italiana) – 10″, voice coil 2″, ferrite magnet
  • HF driver (LAVOCE Italiana) – 1″, voice coil 1″, ferrite magnet

Built-in amplifier (installed into L101BT)

  • Power rating (RMS) – 350 W
  • 2 line stereo inputs – 2 х 1/4″TRS JACK, 2 х RCA
  • 2 microphone inputs – 1/4″TRS JACK
  • Line inputs and Bluetooth input level controls
  • Wireless audio streaming via Bluetooth
  • Line input level control
  • Microphone input level control
  • Three-way EQ for microphone inputs
MODELL-Set 101 BT
L-Set 101 BT
Total Kit Power Handling350 W
Total Maximum Output SPL120.5 dB
Frequency Range58 Hz - 19 kHz
Loudspeaker (L101, L101BT)
ConfigurationTwo-way loudspeaker
Acoustic DesignTrapezoidal cabinet, bass reflex
LF driver10"dia (Lavoce Italiana), voice coil 2"
HF driver1"dia (Lavoce Italiana), voice coil 1"
Power Handling (nominal/continuous)175 / 350 W
Frequency Range58 Hz - 19kHz
Coverage100°H x 50°V
Maximum Output SPL *118 dB/1 m
Weight:
– L10112 kg
– L101BT13 kg
Dimensions: 310 (W) х 525 (H) х 325 (D) mm
Built-in Amplifier (в L101BT)
Power Rating (RMS)350 W (200 W), class D
Sensitivity:775 mV
– line input 1/4"JACK775 mV (0 dBu)
– line input RCA250 mV (-10 dBu)
– microphone input (MIC/LINE)3 mV (- 42 dBu) / 250 mV (-10 dBu)
Input Impedance:
– line input RCA 5 kOhms (unbalanced)
– line input 1/4"JACK 10 kOhms (balanced)
– microphone inputs1 kOhm (balanced)
– microphone inputs (LINE mode)10 kOhms (balanced)
Signal-to-Noise Ratio
– line inputs98 dB
– microphone inputs 94 dB
Mic input equalization:
– LF, HF±15 dB
– MF±12 dB
Input Connectors:
– line inputs2 х RCA, 2 х 1/4"JACK
– microphone inputs 2 х 1/4"JACK
Coolingforced**
Power Requirements~220/230 V, 50/60 Hz
Bluetooth Connection
Bluetooth VersionBluetooth 4.1, Class 2
Supported ProfileA2DP ver. 1.2
Supported CodecSBC, AAC
Maximum
Communication Range
10 m (without interference)
Maximum Output Power
(EIRP)
4 dBm (2.5 mW)
* For comparison purposes and in accordance with common industry practice, maximum SPL specifications are calculations based upon transducer sensitivity, amplifier output voltage and speaker impedance.
** At mains 230 V. In the brackets the power handling of built-in amplifier for L101-P (without L101) is indicated.
*** With smoothly variable intensity. At a normal temperature and low output level the fan is OFF.