Park Audio™
CLASSIC SET 2100.02
Application: PA system for multi-purpose spaces, houses of worship, auditoriums, clubs, restaurants, karaoke bars, music bands.
Kit contents:
- Active two-way loudspeaker L121-P2D – 2 pcs.
- Subwoofer LS153 – 2 pcs.
- Distance rod PSR-04 – 2 pcs.
Kit CLASSIC SET 2100.02
- Total set power handling – 2100 W
- Maximum output SPL 131 dB SPL
- Frequency range 46 Hz – 18 kHz
- Ability to use L121-PSD as active full-range loudspeaker (“Full Range” mode)
Active two-way loudspeaker L121-P2D
- 12″ dia LAVOCE Italiana, voice coil 2,5″
- 1″ dia LAVOCE Italiana, voice coil 1″
- Built-in amplifier 700 W + 350 W RMS (for subwoofer and satellite)
- Two modes: “Full Range” и “Satellite”
- Coverage 90° H х 60° V
Passiev subwoofer LS153
- 15”, 500 W woofer (Lavoce Italiana), voice coil 3″
- Maximum output SPL 128 dB SPL
- Frequency range 46 Hz – 140 Hz
- Sensitivity 96 dB/м
Setting and control
- LСD display for information output and system setup
- System menu for change sound setting: levels, EQ, separate components delay and general system delay
- Intuitive navigation through the system menu by means of encoder
- Built-in noise generator for live sound setting
- USB port for system setting by personal computer
- Original program ParkControl for system and parameters setting by personal computer
- Ability to save 10 user presets
| MODEL | CLASSIC SET 2100.02 |
|---|---|
| CLASSIC SET 2100.02 | |
| Power Handling (total) | 2100 W |
| Frequency Range | 46 Hz - 18 kHz |
| Maximum Output SPL | 131 dB |
| Loudspeaker L121-P2D | |
| Configuration | |
| - LF driver | 12" dia LAVOCE Italiana, voice coil 2,5" |
| - HF driver | 1" dia LAVOCE Italiana, voice coil 1" |
| Acoustic Design | bass reflex |
| Power Handling (nominal/continuous) | 350 W/ 700 W |
| Frequency Range: | |
| - Satellite mode | 110 Hz - 18 kHz |
| - Full Range mode | 53 Hz - 18 kHz |
| Coverage (-6 dB) | 90° H х 40° V |
| Maximum Output SPL (full space)* | 126.5 dB |
| Weight | 22.5 kg |
| Dimensions (W х H х D) | 375 х 575 х 390 mm |
| Built-in Amplifier with DSP engine (in L121-P2D) | |
| Power Rating (RMS) | 700+700 W, class D |
| Sensitivity | 775 mV |
| Input Impedance | 10 kOhms (balanced) |
| Signal-to-Noise Ratio | 98 dB |
| Cooling | forced** |
| Power Requirements | ~220/230 V, 50/60 Hz |
| DSP engine | |
| Sampling Rate | 48 kHz |
| DAC / ADC | 24-bit |
| Internal Processing | 56-bit |
| Subwoofer LS153 | |
| Nominal Power Handling (AES) | 500 W |
| Continuous Power Handling | 1000 W |
| Nominal Impedance | 4 Ohms |
| Frequency Range | 46 Hz – 350 Hz |
| Sensitivity | 96 dB |
| Maximum Output SPL (half space) * | 128 dB/1 m |
| Weight | 26.5 kg |
| Dimensions (W х H х D) | 580 x 470 x 530 mm |
* For comparison purposes and in accordance with common industry practice, maximum SPL specifications are calculations based upon transducer sensitivity, amplifier output voltage and speaker impedance.
** With smoothly variable intensity. At a normal temperature and low output level the fan is OFF.
