Portable Loudspeaker System

Park Audio™

DUPLEX SET

Application

Well-suited for indoor and outdoor usage:
clubs, disco, restaurants, bands.

Kit contents:

  • D422e Compact Active Line Array System – 2pcs.
  • NX6118-P Active Subwoofer – 2pcs.
  • Adjustable Speaker Stand König & Meyer – 2pcs.
  • Duplex set
  • Duplex set
  • Duplex set
  • Duplex set
  • Duplex set
  • Duplex set
  • Duplex set
  • Duplex set
  • Duplex set
  • Duplex set
  • Optimal curved two elements line array
    (LF 8″+ HF 2×1″)
  • Built-in amplifier 2 х 700W RMS with DSP engine (FIR EQ and crossover used)
  • Adjustable vertical tilt ±13.5° (step 4.5°)
  • Coverage 100°H x 22°V
  • Active subwoofer (amp 2000W) with 18” loudspeaker
  • Maximum SPL 133dB/1m
  • Frequency range 38Hz – 18kHz
  • Preset settings switches
  • Adjustable speaker stand König & Meyer with vibration-free connection
  • 16 Mounting holes M10 for D422e
MODELDUPLEX SET
D422e Loudspeaker
ConfigurationPowered two-way compact line array system
LF driver2 x8"dia B&C SPEAKERS, voice coil 2"
HF driver4 x1"dia B&C SPEAKERS, voice coil1.4"
Acoustic design Trapezoid cabinet, bass reflex
Power Handling (nominal/continuous):
– HF100 / 200 W
– LF400 / 800 W
Frequency Range*:
– NORMAL mode 110 Hz - 18 kHz
– LF BOOST mode70 Hz - 18 kHz
Coverage 100°H x 22°V (-6dB)
Maximum Output SPL** 127 dB / 1 m
Weight21 kg
Dimensions:
– width398 mm
– height (front/rear)452/364 mm
–depth364 mm
Built-in Amplifier (In D422e)
Power Rating (RMS)2 х 700 W, class D
Sensitivity775 mV
Input Impedance10 kOhms
Signal-to-Noise Ratio98 dB (unweighted)
Input/Line OutputXLR / XLR
Cooling System forced**
Power Requirements~160-280 V, 50/60 Hz
DSP engine
Sampling Rate48 kHz
DAC/ADC 24-bit
Internal Processing56-bit
NX6118-P Subwoofer
ConfigurationPowered Subwoofer
LF driver18"dia B&C SPEAKERS, voice coil 4"
Acoustic designRectangular cabinet, bass reflex
Power Handling (nominal)1200 W
Power Handling (continuous)2400 W
Frequency Range*38 - 100 Hz
Maximum Output SPL (half space) **133 dB/ 1 m
Weight 42kg
Dimensions (W х H х D):570 x 542 x 672 mm
Built-in Amplifier (In TX6118-P)
Power Rating (RMS)2000 W, class D
Sensitivity775 mV
Input Impedance10 kOhms
Signal-to-Noise Ratio98 dB (unweighted)
Input / Line Output2 х XLR / 2 х XLR
Cooling Systemforced ***
Power Requirements~160-280 V, 50/60 Hz
DSP engine
Sampling Rate48 kHz
DAC/ADC 24-bit
Internal Processing 56-bit
* D422e + NX6118-P Frequency range: 38Hz – 18kHz.
** For comparison purposes and in accordance with common industry practice, maximum SPL specifications are calculations based upon transducer sensitivity, amplifier output voltage and speaker impedance.
*** With smoothly variable intensity. At a normal temperature and low output level the fan is OFF.